Building Materials

EVO-STIK Plasterboard adhesive is a Gun Applied foam developed to bond Plasterboard to most common substrates such as Stone, Concrete, Brick, Metal and Wood. The foam cures under the influence of humidity in the air and substrate. It has excellent thermal and acoustic insulation properties. Excellent adhesion to Expanded Polystyrene, Plasterboards, Insulation Boards Quick and easy to apply with minimal mess or waste Replaces Heavy dry wall adhesive Gun Applied for faster application with less waste Coverage: 25 – 30 litres approx. per 750ml. The coverage yields are the maximum expected if the product is allowed to freely expand. These yields do not include wastage, which can be considerable, depending upon the manner used.

Siniat Joint Filler is a gypsum based joint compound designed for stage 1 of the taping and jointing process, bedding and filling plasterboard joints. Benefits: High quality professional joint filler for bedding and filling Easy mixing Low shrinkage Consistent setting time Also suitable for bedding corner protection For stage 1 of the taping and jointing process

Eco friendly refuse sacks 20 pack.

Gtec Universal Bonding Compound. Gypsum based compound for direct bonding plasterboard to walls or bonding GTEC Metal Furring Wall Channels to walls. BENEFITS Bonds to the majority of masonry substrates Easy to mix and apply Dabs are quickly applied and allows adjustment during boarding Capable of accommodating nominal background irregularities Can accommodate shallow service runs 10-25mm Supplied in 25kg bags

Anchor is a 2-component chemical anchor based on styrene-free vinylester resins in a standard cartridge, sprayable with a Tec Gun. The mixing of the two components is achieved by using static mixing tips. The unique combination of quick hardening, wide application margins and physical properties make it a unique chemical anchor in the professional market for effective fixing and assembly in all building materials, such as concrete, solid and hollow brick, aerated concrete,... . Anchor resists high forces and can be used on wet surfaces, even under water, at temperatures from -5°C to +40°C. After rapid curing, Anchor is stronger than the substrate: without shrinkage, therefore reliable, and without expansion, therefore low-stress. Safe, environmentally friendly and user-friendly. Can also be used indoors: styrene-free, phthalate-free, low odour. Thanks to its exceptionally high UV and chemical resistance, even against chlorinated and salt water, Anchor can be used in aggressive environments. Anchor is dimensionally stable and can also be used overhead in holes in the ceiling. Very long shelf life, even when opened and used. anchor-01.jpg anchor-01.jpg anchor-04.jpg anchor-07.jpg anchor-09.jpg anchor-10.jpg anchor-12.jpg anchor-13.jpg anchor-14.jpg screenreader.slider previousscreenreader.slider next

Gyproc ProMix Finish is a lightweight, ready-to-use, air-drying, ready-mixed filler. Benefits Suitable for all stages of the jointing process Can be used either by hand or with mechanical jointing tools Extremely good workability for easy application Very low shrinkage Easy to sand to an excellent finish

Kilsaran Post 10 Concrete Post Mix Key features: Just add water so very easy to use Ideal for fencing and support posts 20kg bag Sets very quickly

Universally applicable adhesive and sealant. All applications in construction, sanitary and general maintenance. Tec7 adheres to most surfaces and does not attack plastics. Safe to use on all materials, mirrors, natural stone, polystyrene, non-ferrous metals, most plastics, ... Can be used on damp surfaces, even submerged in water. Can be quickly painted over with most common paints (do not use with alkyd paints). Tec7 has less adhesion to PP, PE, PTFE, bitumen and silicone. Adhesion on PP is improved with the PT7 primer.